ISDN Vigor 128 Firmware update ????

Dieses Thema im Forum "Hardware" wurde erstellt von Pexx, 18. Mai 2001.

  1. Pexx

    Pexx New Member

    Hi ihr Maccies,

    ich habe einen etwas betagten isdn vigor 128 mit Firmware 1.02, der nicht mit X laufen will.

    draytek.com sagt zur Kompatibilität folgendes:

    "For isdnVigor128, you need the firmware version >= V1.03. If your isdnVigor128 firmware is V1.02 or older, it can not work with Mac OS X. You can easily check the firmware version via opening the case of isdnVigor128. There will have a firmware version ticket on EPROM."

    Wie komme ich von Firmware 1.02 nach 1.03. Irgendwelche Hinweise  außer Neukauf?

    Danke - Pexx
     
  2. RAZOR

    RAZOR New Member

    DrayTek isdnVigor128 Mac version with 1.03 firmware can
    be run together with the Mac OS X-supported driver. Please
    kindly open the housing to check whether your isdnVigor128
    Mac version is with 1.03 firmware EPROM.

    Once your firmware EPROM shows that the version is 1.02 or
    less version, you can have following two options:

    1. Purchase the Upgrade Kit which has the 1.03 firmware
    EPROM, Tool, latest Driver CD.
    We will charge the Uprade Kit at USD10/per set with
    post fee.

    2. Purchase the miniVigor128 USB ISDN TA through DrayTek's
    reselling channels.Thanks very much again for your past
    purchase of isdnVigor128. Should you have any queries,
    please do not hesitate to let us know.

    bye
     

Diese Seite empfehlen