Mac OS ERROR 1

Dieses Thema im Forum "Software" wurde erstellt von macfragezeichen, 1. Oktober 2003.

  1. macfragezeichen

    macfragezeichen New Member

    erscheint mir hier nach 3 minuten des Konvertierens eines aiff in AC3. Was hat es zu bedeuten ? Es gab doch mal irgendwo eine Fehlerliste vom OS . Kann sie leider nicht mehr finden:-(
    Hilfe
     
  2. gratefulmac

    gratefulmac New Member

    Mac OS Error Codes


    DS Error Table
    1 dsBusError bus error
    2 dsAddressErr address error
    3 dsIllInstErr illegal instruction error
    4 dsZeroDivErr zero divide error
    5 dsChkErr check trap error
    6 dsOvflowErr overflow trap error
    7 dsPrivErr privilege violation error
    8 dsTraceErr trace mode error
    9 dsLineAErr line 1010 trap error
    10 dsLineFErr line 1111 trap error
    11 dsMiscErr miscellaneous hardware exception error
    12 dsCoreErr unimplemented core routine error
    13 dsIrqErr uninstalled interrupt error
    14 dsIOCoreErr IO Core Error
    15 dsLoadErr Segment Loader Error
    16 dsFPErr Floating point error
    17 dsNoPackErr package 0 not present [List Manager]
    18 dsNoPk1 package 1 not present [Reserved by Apple]
    19 dsNoPk2 package 2 not present [Disk Initialization]
    20 dsNoPk3 package 3 not present [Standard File]
    21 dsNoPk4 package 4 not present [Floating-Point Arithmetic]
    22 dsNoPk5 package 5 not present [Transcendental Functions]
    23 dsNoPk6 package 6 not present [International Utilities]
    24 dsNoPk7 package 7 not present [Binary/Decimal Conversion]
    25 dsMemFullErr out of memory!
    26 dsBadLaunch can't launch file
    27 dsFSErr file system map has been trashed
    28 dsStknHeap stack has moved into application heap
    30 dsReinsert request user to reinsert off-line volume
    31 dsNotThe1 not the disk I wanted (obsolete)
    33 negZcbFreeErr ZcbFree has gone negative
    40 dsGreeting welcome to Macintosh greeting
    41 dsFinderErr can't load the Finder error
    42 shutDownAlert handled like a shutdown error (obsolete)
    43 dsSystemFileErr can't find System file to open (obsolete)
    51 dsBadSlotInt unserviceable slot interrupt
    81 dsBadSANEopcode bad opcode given to SANE Pack4
    84 menuPrgErr happens when a menu is purged
    85 dsMBarNFnd SysErr -- cannot find MBDF
    86 dsHMenuFindErr SysErr -- recursively defined HMenus
    87 dsWDEFnFnd Could not load WDEF
    88 dsCDEFnFnd Could not load CDEF
    89 dsMDEFnFnd Could not load MDEF
    98 dsNoPatch Can't patch for particular Model Mac
    99 dsBadPatch Can't load patch resource
    101 dsParityErr memory parity error
    102 dsOldSystem System is too old for this ROM
    103 ds32BitMode booting in 32-bit on a 24-bit sys
    20000 dsShutDownOrRestart user choice between ShutDown and Restart
    20001 dsSwitchOffOrRestart user choice between switching off and Restart
    20002 dsForcedQuit allow the user to ExitToShell, return if Cancel
    32767 dsSysErr general system error (catch-all used in DSAT)
     
  3. gratefulmac

    gratefulmac New Member

    General System Errors (VBL Mgr, Queue, Etc.)
    0 noErr 0 for success *OR* 0 smNotTruncated No truncation necessary
    -1 qErr queue element not found during deletion *OR*
    -1 smTruncErr Truncation indicator alone is wider than the specified width
    -2 vTypErr invalid queue element
    -3 corErr core routine number out of range
    -4 unimpErr unimplemented core routine
    -5 SlpTypeErr invalid queue element
    -8 seNoDB no debugger installed to handle debugger doc/dialupand
     
  4. gratefulmac

    gratefulmac New Member

    Color Manager Errors
    -9 iTabPurgErr from Color2Index/ITabMatch
    -10 noColMatch from Color2Index/ITabMatch
    -11 qAllocErr from MakeITable
    -12 tblAllocErr from MakeITable
    -13 overRun from MakeITable
    -14 noRoomErr from MakeITable
    -15 seOutOfRange from SetEntry
    -16 seProtErr from SetEntry
    -17 i2CRangeErr from SetEntry
    -18 gdBadDev from SetEntry
    -19 reRangeErr from SetEntry
    -20 seInvRequest from SetEntry
    -21 seNoMemErr from SetEntry
     
  5. gratefulmac

    gratefulmac New Member

    I/O System Errors
    -17 controlErr Driver can't respond to Control call
    -18 statusErr Driver can't respond to Status call
    -19 readErr Driver can't respond to Read call
    -20 writErr Driver can't respond to Write call
    -21 badUnitErr Driver ref num doesn't match unit table
    -22 unitEmptyErr Driver ref num specifies NIL handle in unit table
    -23 openErr Requested read/write permission doesn't match driver's open permission, or Attempt to open RAM serial Driver failed
    -24 closErr Close failed; Permission to close .MPP driver was denied
    -25 dRemovErr tried to remove an open driver
    -26 dInstErr DrvrInstall couldn't find driver in resources
    -27 abortErr IO call aborted by KillIO; Publisher has written a new edition *OR*
    -27 iIOAbortErr IO abort error (Printing Manager)
    -28 notOpenErr Couldn't rd/wr/ctl/sts cause driver not opened
    -29 unitTblFullErr Unit table has no more entries
    -30 dceExtErr dce extension error
     
  6. gratefulmac

    gratefulmac New Member

    File System Errors
    -33 dirFulErr Directory full
    -34 dskFulErr Disk full
    -35 nsvErr No such volume; volume not found
    -36 ioErr I/O error (bummers)
    -37 bdNamErr Bad file name; there may be no bad names in the final system!
    -38 fnOpnErr File not open
    -39 eofErr End of file; no additional data in the format
    -40 posErr Tried to position to before start of file (r/w)
    -41 mFulErr Memory full (open) or file won't fit (load)
    -42 tmfoErr too many files open
    -43 fnfErr File not found; Folder not found; Edition container not found; Target not found
    -44 wPrErr Diskette is write protected; Volume is locked through hardware
    -45 fLckdErr File is locked
    -45 fLckedErr Publisher writing to an edition
    -46 vLckdErr Volume is locked through software
    -47 fBsyErr File is busy (delete); Section doing I/O
    -48 dupFNErr Duplicate filename (rename); File found instead of folder
    -49 opWrErr File already open with with write permission
    -50 paramErr Error in user parameter list
    -51 rfNumErr Reference number invalid
    -52 gfpErr Get file position error
    -53 volOffLinErr Volume is off line
    -54 permErr Software lock on file; Not a subscriber [permissions error on file open]
    -55 volOnLinErr drive volume already on-line at MountVol
    -56 nsDrvErr no such drive (tried to mount a bad drive num)
    -57 noMacDskErr not a mac diskette (sig bytes are wrong)
    -58 extFSErr External file system ? file system identifier is nonzero
    -59 fsRnErr file system internal error: during rename the old entry was deleted but could not be restored
    -60 badMDBErr bad master directory block
    -61 wrPermErr Write permissions error; Not a publisher
     
  7. gratefulmac

    gratefulmac New Member

    Font Manager Errors
    -64 fontDecError error during font declaration
    -65 fontNotDeclared font not declared
    -66 fontSubErr font substitution occured

    Disk, Serial Ports, Clock Specific Errors
    -64 lastDskErr
    -64 noDriveErr drive not installed
    -65 offLinErr r/w requested for an off-line drive
    -66 noNybErr couldn't find 5 nybbles in 200 tries
    -67 noAdrMkErr couldn't find valid addr mark
    -68 dataVerErr read verify compare failed
    -69 badCksmErr addr mark checksum didn't check
    -70 badBtSlpErr bad addr mark bit slip nibbles
    -71 noDtaMkErr couldn't find a data mark header
    -72 badDCksum bad data mark checksum
    -73 badDBtSlp bad data mark bit slip nibbles
    -74 wrUnderrun write underrun occurred
    -75 cantStepErr step handshake failed
    -76 tk0BadErr track 0 detect doesn't change
    -77 initIWMErr unable to initialize IWM
    -78 twoSideErr tried to read 2nd side on a 1-sided drive
    -79 spdAdjErr unable to correctly adjust disk speed
    -80 seekErr track number wrong on address mark
    -81 sectNFErr sector number never found on a track
    -82 fmt1Err can't find sector 0 after track format
    -83 fmt2Err can't get enough sync
    -84 verErr track failed to verify
    -84 firstDskErr
    -85 clkRdErr unable to read same clock value twice
    -86 clkWrErr time written did not verify
    -87 prWrErr parameter ram written didn't read-verify
    -88 prInitErr InitUtil found the parameter ram uninitialized
    -89 rcvrErr SCC receiver error (framing, parity, OR)
    -90 breakRecd Break received (SCC)
     
  8. gratefulmac

    gratefulmac New Member

    AppleTalk Errors
    -91 ddpSktErr Error opening socket *OR*
    -91 eMultiErr Invalid address or table is full
    -92 ddpLenErr Data length too big *OR*
    -92 eLenErr Packet too large or first entry of the write-data structure did not contain the full 14-byte header
    -93 noBridgeErr No router available [for non-local send]
    -94 lapProtErr error in attaching/detaching protocol *OR*
    -94 LAPProtErr Protocol handler is already attached, node's protocol table is full, protocol not attached, or protocol handler pointer -95 excessCollsns Hardware error [excessive collisions on write]
    -97 portInUse driver Open error code (port is in use)
    -98 portNotCf driver Open error code (parameter RAM not configured for this connection)
    -99 memROZErr hard error in ROZ
    -99 memROZError hard error in ROZ
    -99 memROZWarn soft error in ROZ

    Scrap Manager Errors
    -100 noScrapErr No scrap exists error
    -102 noTypeErr Format not available

    Storage Allocator Errors
    -108 memFullErr Ran out of memory [not enough room in heap zone]
    -109 nilHandleErr GetHandleSize fails on baseText or substitutionText; NIL master pointer [handle was NIL in HandleZone or other]
    -110 memAdrErr Address was odd, or out of range
    -111 memWZErr Attempted to operate on a free block; GetHandleSize fails on baseText or substitutionText [WhichZone failed (applied -112 memPurErr Trying to purge a locked or non-purgeable block
    -113 memAZErr Address in zone check failed
    -114 memPCErr Pointer Check failed
    -115 memBCErr Block Check failed
    -116 memSCErr Size Check failed
    -117 memLockedErr Trying to move a locked block (MoveHHi)

    HFS Errors
    -120 dirNFErr Directory not found
    -121 tmwdoErr No free WDCB available
    -122 badMovErr Move into offspring error
    -123 wrgVolTypErr Not an HFS volume [wrong volume type error or (obsolete) operation not supported for MFS]
    -124 volGoneErr Server volume has been disconnected.
    -125 updPixMemErr Insufficient memory to update a pixmap
    -127 fsDSIntErr Internal file system error

    Menu Manager Errors
    -126 dsMBarNFnd System error code for MBDF not found
    -127 dsHMenuFindErr Could not find HMenu's parent in MenuKey
    -128 userCanceledErr User canceled an operation

    HFS FileID Errors
    -130 fidNotFound no file thread exists
    -131 fidNotAFile directory specified
    -132 fidExists file id already exists
     
  9. macfragezeichen

    macfragezeichen New Member

    Danke, Danke :)
    also ein Bus error.
    Mhhhhh
     
  10. macfragezeichen

    macfragezeichen New Member

    Dann schau ich mir mal die Lage der files an,
    Vielleicht auf der gleichen Platte alles machen.
     
  11. gratefulmac

    gratefulmac New Member

    Sound Manager Errors
    -200 noHardware Required sound hardware not available [no hardware support for the specified synthesizer]
    -201 notEnoughHardware Insufficient hardware available [no more channels for the specified synthesizer]
    -203 queueFull No room in the queue
    -204 resProblem Problem loading the resource
    -205 badChannel Channel is corrupt or unusable [invalid channel queue length]
    -206 badFormat Resource is corrupt or unusable [handle to 'snd ' resource was invalid]
    -207 notEnoughBufferSpace Insufficient memory available
    -208 badFileFormat File is corrupt or unusable, or not AIFF or AIFF-C
    -209 channel Channel is busy
    -210 buffersTooSmall Buffer is too small
    -211 channelNotBusy Channel not currently used
    -212 noMoreRealTime Not enough CPU time available
    -213 badParam A parameter is incorrect
    -220 siNoSoundInHardware No sound input hardware available
    -221 siBadSoundInDevice Invalid sound input device
    -222 siNoBufferSpecified No buffer specified
    -223 siInvalidCompression Invalid compression type
    -224 siHardDiskTooSlow Hard drive too slow to record
    -225 siInvalidSampleRate Invalid sample rate
    -226 siInvalidSampleSize Invalid sample size
    -227 siDeviceBusyErr Sound input device is busy
    -228 siBadDeviceName Invalid device name
    -229 siBadRefNum Invalid reference number
    -230 siInputDeviceErr Input device hardware failure
    -231 siUnknownInfoType Unknown type of information
    -232 siUnknownQuality Unknown quality

    MIDI Manager Errors
    -250 midiNoClientErr no client with that ID found
    -251 midiNoPortErr no port with that ID found
    -252 midiTooManyPortsErr too many ports already installed in the system
    -253 midiTooManyConsErr too many connections made
    -254 midiVConnectErr pending virtual connection created
    -255 midiVConnectMade pending virtual connection resolved
    -256 midiVConnectRmvd pending virtual connection removed
    -257 midiNoConErr no connection exists between specified ports
    -258 midiWriteErr couldn't write to all connected ports
    -259 midiNameLenErr name supplied is longer than 31 characters
    -260 midiDupIDErr duplicate client ID
    -261 midiInvalidCmdErr doc/dialupand not supported for port type

    Notification Manager Error
    -299 nmTypErr Invalid qType?must be ORD(nmType)

    Start Manager Errors
    -290 smSDMInitErr SDM could not be initialized.
    -291 smSRTInitErr Slot Resource Table could not be initialized.
    -292 smPRAMInitErr Slot Resource Table could not be initialized.
    -293 smPriInitErr Cards could not be initialized.
    -300 smEmptySlot No card in slot
    -301 smCRCFail CRC check failed for declaration data
    -302 smFormatErr FHeader Format is not Apple's
    -303 smRevisionErr Wrong revison level
    -304 smNoDir Directory offset is Nil
    -305 smLWTstBad Long Word test field <> $5A932BC7.
    -306 smNosInfoArray No sInfoArray. Memory Mgr error.
    -307 smResrvErr Fatal reserved error. Reserved field <> 0.
    -308 smUnExBusErr Unexpected Bus Error
    -309 smBLFieldBad ByteLanes field was bad.
    -310 smFHBlockRdErr Error occured during _sGetFHeader.
    -311 smFHBlkDispErr Error occured during _sDisposePtr (Dispose of FHeader block).
    -312 smDisposePErr _DisposePointer error
    -313 smNoBoardsRsrc No Board sResource.
    -314 smGetPRErr Error occured during _sGetPRAMRec (See SIMStatus).
    -315 smNoBoardId No Board Id.
    -316 smIntStatVErr The InitStatusV field was negative after primary or secondary init.
    -317 smIntTblVErr An error occured while trying to initialize the Slot Resource Table.
    -318 smNoJmpTbl SDM jump table could not be created.
    -319 smBadBoardId BoardId was wrong, re-init the PRAM record.
    -320 smBusErrTO BusError time out.
    -330 smBadRefId Reference Id not found in list
    -331 smBadsList Bad sResource [sList] structure: Id1<Id2<Id3 ? format is not followed.
    -332 smReservedErr Reserved field not zero
    -333 smCodeRevErr Code revision is wrong
    -334 smCPUErr Code revision is wrong
    -335 smsPointerNil LPointer is nil {From sOffsetData. If this error occurs, check sInfo rec for more information.}
    -336 smNilsBlockErr Nil sBlock error {Dont allocate and try to use a nil sBlock}
    -337 smSlotOOBErr Slot out of bounds error
    -338 smSelOOBErr Selector out of bounds error; function not implemented
    -339 smNewPErr _NewPtr error
    -340 smBlkMoveErr _BlockMove error
    -341 smCkStatusErr Status of slot = fail.
    -342 smGetDrvrNamErr Error occured during _sGetDrvrName.
    -343 smDisDrvrNamErr Error occured during _sDisDrvrName.
    -344 smNoMoresRsrcs No more sResources
    *OR*
    -344 smNoMoresResources Specified sResource data structure not found
    -345 smsGetDrvrErr Error occurred during _sGetDriver.
    -346 smBadsPtrErr Bad pointer was passed to sCaldSPointer function
    -347 smByteLanesErr ByteLanes field in card's format block was determined to be zero
    -348 smOffsetErr Offset was too big (temporary, should be fixed)
    -349 smNoGoodOpens No opens were successfull in the loop.
    -350 smSRTOvrFlErr SRT over flow.
    -351 smRecNotFnd Record not found in the SRT.

    Device Manager Slot Support Errors
    -360 slotNumErr invalid slot # error
    -400 gcrOnMFMErr gcr format on high density media error

    Edition Manager Errors
    -450 editionMgrInitErr Manager not initialized or could not load package
    -451 badSectionErr Not a valid section type
    -452 notRegisteredSectionErr Not registered
    -454 badSubPartErr Bad edition container spec or invalid edition container
    -460 multiplePublisherWrn Already is a publisher
    -461 containerNotFoundWrn Alias was not resolved
    -463 notThePublisherWrn Not the publisher

    SCSI Manager Errors
    -470 scsiBadPBErr invalid field(s) in the parameter block
    -471 scsiOverrunErr attempted to transfer too many bytes
    -472 scsiTransferErr write flag conflicts with data transfer phase
    -473 scsiBusTOErr bus error during transfer
    -474 scsiSelectTOErr scsiSelTO exceeded (selection failed)
    -475 scsiTimeOutErr scsiReqTO exceeded
    -476 scsiBusResetErr the bus was reset, so your request was aborted
    -477 scsiBadStatus non-zero (not "Good") status returned
    -478 scsiNoStatusErr device did not go through a status phase
    -479 scsiLinkFailErr linked doc/dialupand never executed
    -489 scsiUnimpVctErr unimplemented routine was called

    SysErrs used instead of inline $A9FF & $ABFF
    -490 userBreak user debugger break
    -491 strUserBreak user debugger break - display string on stack
    -492 exUserBreak user debugger break - execute doc/dialupands on stack

    QuickDraw Error
    -500 rgnTooBigErr Bitmap would convert into a region greater than 64 KB

    Text Edit Error
    -501 teScrapSizeErr scrap item too big for text edit record

    OS Error
    -502 hwParamrErr bad selector for _HWPriv

    Processes Errors
    -600 procNotFound !! No eligible process with specified process serial number
    -601 memFragErr !! Not enough room to launch application with special requirements
    -602 appModeErr !! Memory mode is 32-bit, but application is not 32-bit clean
    -603 protocolErr !! app made module calls in improper order
    -604 hardwareConfigErr !! hardware configuration not correct for call
    -605 appMemFullErr !! Partition size specified in 'SIZE' resource is not big enough for launch
    -606 appIsDaemon !!! Application is background-only
    -607 bufferIsSmall !! Buffer is too small
    -608 noOutstandingHLE !! No outstanding high-level event
    -609 connectionInvalid Connection is invalid
    -610 noUserInteractionAllowed Attempted PostHighLevelEvent from background and no session yet established

    Memory Dispatch Errors
    -620 notEnoughMemoryErr Insufficient physical memory
    -621 notHeldErr Specified range of memory is not held
    -622 cannotMakeContiguousErr Cannot make specified range contiguous
    -623 notLockedErr Specified range of memory is not locked
    -624 interruptsMaskedErr Called with interrupts masked
    -625 cannotDeferErr Unable to defer additional user functions

    DatabaseAccess (Pack 13) Errors
    -800 rcDBNull The data item was NULL
    -801 rcDBValue Data available or successfully retrieved
    -802 rcDBError Error executing function
    -803 rcDBBadType Next data item not of requested data type
    -804 rcDBBreak Function timed out
    -805 rcDBExec Query currently executing
    -806 reDBBadSessID Session ID is invalid
    -807 rcDBBadSessNum Invalid session number
    -808 rcDBBadDDEV Couldn't find the specified database extension, or error occurred in opening database extension
    -809 rcDBAsyncNotSupp The database extension does not support asynchronous calls
    -810 rcDBBadAsyncPB Invalid parameter block specified
    -811 rcDBNoHandler There is no handler for this data type installed for the current application
    -812 rcDBWrongVersion Wrong version number
    -813 rcDBPackNotInited The InitDBPack function has not yet been called

    Help Manager Errors
    -850 hmHelpDisabled Help balloons are not enabled
    -851 hmResNotFound ????
    -852 hmMemFullErr ????
    -853 hmBalloonAborted Because of constant cursor movement, the help balloon wasn't displayed
    -854 hmSameAsLastBalloon Menu and item are same as previous menu and item
    -855 hmHelpManagerNotInited Help menu not set up
    -856 hmBadSelector ????
    -857 hmSkippedBalloon No ballon content to fill in
    -858 hmWrongVersion Wrong version of Help Manager resource
    -859 hmUnknownHelpType Help message record contained a bad type
    -860 hmCouldNotLoadPackage ????
    -861 hmOperationUnsupported Bad method parameter
    -862 hmNoBalloonUp No balloon showing
    -863 hmCloseViewActive User using Close View won't let you remove balloon
     
  12. gratefulmac

    gratefulmac New Member

    Wenn jemand die komplette List braucht , kann ich sie noch copypasten.
    Es sind nur noch 200000 Zeichen. ;-)
     
  13. macfragezeichen

    macfragezeichen New Member

    Bei Gelegenheit:)
    Ersten Fehler hab ich schon ausgemacht : Ruhezustand war nach 3 min aktiviert.
    Nun neuer Fehler gleich beim Starten des Konvertierprozesses : 37 !
    Muß ich wohl die Dateien umbenennen....?
    Verwunderlich ist nur das es vorhin schon 3 minuten losgelegt hat.
     
  14. macfragezeichen

    macfragezeichen New Member

    Scheint zu laufen :) Genaues wird sich in 15 min zeigen..
    Nochmal Danke gratefulmac.
     
  15. macfragezeichen

    macfragezeichen New Member

    erscheint mir hier nach 3 minuten des Konvertierens eines aiff in AC3. Was hat es zu bedeuten ? Es gab doch mal irgendwo eine Fehlerliste vom OS . Kann sie leider nicht mehr finden:-(
    Hilfe
     
  16. gratefulmac

    gratefulmac New Member

    Mac OS Error Codes


    DS Error Table
    1 dsBusError bus error
    2 dsAddressErr address error
    3 dsIllInstErr illegal instruction error
    4 dsZeroDivErr zero divide error
    5 dsChkErr check trap error
    6 dsOvflowErr overflow trap error
    7 dsPrivErr privilege violation error
    8 dsTraceErr trace mode error
    9 dsLineAErr line 1010 trap error
    10 dsLineFErr line 1111 trap error
    11 dsMiscErr miscellaneous hardware exception error
    12 dsCoreErr unimplemented core routine error
    13 dsIrqErr uninstalled interrupt error
    14 dsIOCoreErr IO Core Error
    15 dsLoadErr Segment Loader Error
    16 dsFPErr Floating point error
    17 dsNoPackErr package 0 not present [List Manager]
    18 dsNoPk1 package 1 not present [Reserved by Apple]
    19 dsNoPk2 package 2 not present [Disk Initialization]
    20 dsNoPk3 package 3 not present [Standard File]
    21 dsNoPk4 package 4 not present [Floating-Point Arithmetic]
    22 dsNoPk5 package 5 not present [Transcendental Functions]
    23 dsNoPk6 package 6 not present [International Utilities]
    24 dsNoPk7 package 7 not present [Binary/Decimal Conversion]
    25 dsMemFullErr out of memory!
    26 dsBadLaunch can't launch file
    27 dsFSErr file system map has been trashed
    28 dsStknHeap stack has moved into application heap
    30 dsReinsert request user to reinsert off-line volume
    31 dsNotThe1 not the disk I wanted (obsolete)
    33 negZcbFreeErr ZcbFree has gone negative
    40 dsGreeting welcome to Macintosh greeting
    41 dsFinderErr can't load the Finder error
    42 shutDownAlert handled like a shutdown error (obsolete)
    43 dsSystemFileErr can't find System file to open (obsolete)
    51 dsBadSlotInt unserviceable slot interrupt
    81 dsBadSANEopcode bad opcode given to SANE Pack4
    84 menuPrgErr happens when a menu is purged
    85 dsMBarNFnd SysErr -- cannot find MBDF
    86 dsHMenuFindErr SysErr -- recursively defined HMenus
    87 dsWDEFnFnd Could not load WDEF
    88 dsCDEFnFnd Could not load CDEF
    89 dsMDEFnFnd Could not load MDEF
    98 dsNoPatch Can't patch for particular Model Mac
    99 dsBadPatch Can't load patch resource
    101 dsParityErr memory parity error
    102 dsOldSystem System is too old for this ROM
    103 ds32BitMode booting in 32-bit on a 24-bit sys
    20000 dsShutDownOrRestart user choice between ShutDown and Restart
    20001 dsSwitchOffOrRestart user choice between switching off and Restart
    20002 dsForcedQuit allow the user to ExitToShell, return if Cancel
    32767 dsSysErr general system error (catch-all used in DSAT)
     
  17. gratefulmac

    gratefulmac New Member

    General System Errors (VBL Mgr, Queue, Etc.)
    0 noErr 0 for success *OR* 0 smNotTruncated No truncation necessary
    -1 qErr queue element not found during deletion *OR*
    -1 smTruncErr Truncation indicator alone is wider than the specified width
    -2 vTypErr invalid queue element
    -3 corErr core routine number out of range
    -4 unimpErr unimplemented core routine
    -5 SlpTypeErr invalid queue element
    -8 seNoDB no debugger installed to handle debugger doc/dialupand
     
  18. gratefulmac

    gratefulmac New Member

    Color Manager Errors
    -9 iTabPurgErr from Color2Index/ITabMatch
    -10 noColMatch from Color2Index/ITabMatch
    -11 qAllocErr from MakeITable
    -12 tblAllocErr from MakeITable
    -13 overRun from MakeITable
    -14 noRoomErr from MakeITable
    -15 seOutOfRange from SetEntry
    -16 seProtErr from SetEntry
    -17 i2CRangeErr from SetEntry
    -18 gdBadDev from SetEntry
    -19 reRangeErr from SetEntry
    -20 seInvRequest from SetEntry
    -21 seNoMemErr from SetEntry
     
  19. gratefulmac

    gratefulmac New Member

    I/O System Errors
    -17 controlErr Driver can't respond to Control call
    -18 statusErr Driver can't respond to Status call
    -19 readErr Driver can't respond to Read call
    -20 writErr Driver can't respond to Write call
    -21 badUnitErr Driver ref num doesn't match unit table
    -22 unitEmptyErr Driver ref num specifies NIL handle in unit table
    -23 openErr Requested read/write permission doesn't match driver's open permission, or Attempt to open RAM serial Driver failed
    -24 closErr Close failed; Permission to close .MPP driver was denied
    -25 dRemovErr tried to remove an open driver
    -26 dInstErr DrvrInstall couldn't find driver in resources
    -27 abortErr IO call aborted by KillIO; Publisher has written a new edition *OR*
    -27 iIOAbortErr IO abort error (Printing Manager)
    -28 notOpenErr Couldn't rd/wr/ctl/sts cause driver not opened
    -29 unitTblFullErr Unit table has no more entries
    -30 dceExtErr dce extension error
     
  20. gratefulmac

    gratefulmac New Member

    File System Errors
    -33 dirFulErr Directory full
    -34 dskFulErr Disk full
    -35 nsvErr No such volume; volume not found
    -36 ioErr I/O error (bummers)
    -37 bdNamErr Bad file name; there may be no bad names in the final system!
    -38 fnOpnErr File not open
    -39 eofErr End of file; no additional data in the format
    -40 posErr Tried to position to before start of file (r/w)
    -41 mFulErr Memory full (open) or file won't fit (load)
    -42 tmfoErr too many files open
    -43 fnfErr File not found; Folder not found; Edition container not found; Target not found
    -44 wPrErr Diskette is write protected; Volume is locked through hardware
    -45 fLckdErr File is locked
    -45 fLckedErr Publisher writing to an edition
    -46 vLckdErr Volume is locked through software
    -47 fBsyErr File is busy (delete); Section doing I/O
    -48 dupFNErr Duplicate filename (rename); File found instead of folder
    -49 opWrErr File already open with with write permission
    -50 paramErr Error in user parameter list
    -51 rfNumErr Reference number invalid
    -52 gfpErr Get file position error
    -53 volOffLinErr Volume is off line
    -54 permErr Software lock on file; Not a subscriber [permissions error on file open]
    -55 volOnLinErr drive volume already on-line at MountVol
    -56 nsDrvErr no such drive (tried to mount a bad drive num)
    -57 noMacDskErr not a mac diskette (sig bytes are wrong)
    -58 extFSErr External file system ? file system identifier is nonzero
    -59 fsRnErr file system internal error: during rename the old entry was deleted but could not be restored
    -60 badMDBErr bad master directory block
    -61 wrPermErr Write permissions error; Not a publisher
     

Diese Seite empfehlen